MANUALs
Active Mic Cable Manual
DI-SNAKE Manual (EN)
ACTIVE MIC CABLE FAQs
Does "Active" means this cable has some gain? What dB?
Active Mic Cable has 0dB unity gain. It is microphone cable that has buffer amp inside.
So it doesn't amplify at all, does it have the advantage?
Yes it does! It eliminates braking element that limiting the movement of diaphragm and unleash the potential of your microphone.
Could this cable use to both transformer output type and transformer less type microphones?
Yes you can use to both types. If it is a dynamic microphone, the sound quality will improved by reducing electromagnetic braking with or without output transformer.
Can I use this to condenser microphones?
No you can't. Active Mic Cable will not through the phantom power from preamp so it doesn't feed the microphones. Some models are exceptions, such as battery-powered.
I heard that it can be used to tube condenser microphones! Is it true?
Yes you can use to both types. If it is a dynamic microphone, the sound quality will improved by reducing electromagnetic braking with or without output transformer.
From specifications, input impedance 56kΩ is doesn't seem to high.
It is low compared to DI input but high enough for micrphone impedance. It is not the impedance value, but the location where the high impedance is received (right after the microphone output) is the major advantage.
Can I extend the length?
Yes you can. There is a report that it can use with 40m extension. Please connect the Active Mic Cable after the micprophone.
Can this active 16 ft cable be plugged into my 50 ft long Mogami cable snake and still be effective over the 66 ft run?
This cable is also intended to be used in extension cables. We confirm it worked with 50m (164ft) without any problem. Be sure to use Active Mic Cable at closest position to the microphone. If not it will reduce the effect.
Some ribbon mics do not tolerate 48v phantom power.Does the 48 v stop at the circuitry in the XLR housing and therefore not reachthe mic itself?
The cable will shut out the 48V so it doesn’t reach to the microphone. Active Mic Cable will use 48V phantom power to powering the buffer amp itself.
What brand of cable and connectors do you use in manufacturing the cable?
Cable MOGAMI 2534
Phone plug NEUTRIK NP2X-AU-SILENT
NEUTRIK NC3MXX-B
Specification of cable
Part No. 2534
・No. of Conductor: 4 (Balanced quad structure)
・Conductor: 20/0.12 OFC 0.226mm2(#24AWG)
・Insulation: 1.6φ(0.063") XLPE( Cross-Linked Polyethylene )
・Served Shield: Spiral shield 62/0.18A
・Jacket: 6.0mmφ(0.236") Flexible PVC
TECHNICAL GUIDEs
Active Mic Cable Tech Guide
DI-SNAKE TECH GUDE
Policy
Shipping Policy
Usually we ship the next business day. We do not ship on weekends or Japan holidays. All of products shown on the page is in stock at our shop and ready to ship. Custom orders will take longer to ship, we will notify you by email of the shipping delay.
Tracking information is provided by email.
Please do not ask us to mark your item as a gift or to mark your item at a lower cost.
You are responsible for any customs fees, duties, tariffs, taxes, etc that you may incur. We do not offer refunds on denied shipments due to a lack of customs pickup.
Refund Policy
If you are not satisfied with our products, we accept the return and refund. To be eligible for a return, your item must have been purchased in the last 30 days and in the same, working condition that you received it. It must also be in the original packaging. Please email us to arrange the return and refund.
All returns and cancellations are subject to a 10% restocking fee. You are responsible for covering the shipping cost to return it back to us. This does not apply to defective products.
The return shipping method must include tracking and a declaration of the full value to protect against lost shipments.
If you believe your products arrived defective or damaged, please contact us immediately.