Active Mic Cable Overview
Active Mic Cable is utility mic cable that specialized for improving sound quality of dynamic microphones (moving coil / ribbon). It has class A buffer amplifier circuit with two transistors inside XLR (F) plug that connects to the microphone output.
The buffer circuit operates on 48V Phantom power so it can be used in the same way as normal microphone cable.
With controlling the electromagnetic braking that dynamic microphones have, it will achive the wider dynamic range. The active buffer circuit that place immediately after the microphone output will provide best impedance conversion and signal transmission from electrical and physical sides.
Controlling the "Electromagnetic braking"
The basic operation of transducer that dynamic microphone has is based on power generation of electromagnetic induction which comes from a coil and permanent magnet. When the electric current has generated by electromagnetic induction, the current will generate a power to opposite direction and interrupt the power generation. This is called "electormagnetic braking" and it will limit the diaphragm movement.
Active Mic Cable will eliminate this braking and achive wider dynamic range. It will lead to the higher resolution and more open-air sounds.
Best impedance transformation
The amplifier circuit of Active Mic Cable is placed inside the XLR connector that connect the microphone. So there will be impedance transformation right after the microphone output. That means the impedance for thereafter section will be low and there will be no high impedance section. It will eliminate the degradation of sound caused by line to line capacitance.
The buffer circuit has place to the most ideal position that right after the output and provide best impedance conversion and signal transmission from electrical and physical sides.
While other ordinally microphone cables are aiming at just the sound quality, the Active Mic Cable is also providing the improvements and unleash the potential. It is the only cable that adds new element to your favorite microphone!
Specifications
Power
|
P48 Phantom power,
|
Input Impedance
|
56kΩ |
THD+N
|
<0.008% (-30dBu Input ,1kHz) |
Frequency Response
|
5Hz - 80kHz @ -0.5dB |
Maximum Input Level
|
0dBu |
Cable Length
|
5meter (16.4ft) |
User Manual
Download here
Technical Guide
https://umbrella-company.net/blogs/articles/active-mic-cable-technical-note
Q+A
https://umbrella-company.net/pages/support